Placing Exchange 2013 Into Maintenance Mode


Updated 5 Feb 2013 to include Redirect-Message cmdlet
Exchange 2013 has a feature called Managed Availability. This feature detects issues with a server and in the event of an issue attempts to fix the component at issue. Fixes range from simple restarts of the component (for example restarting the service) to doing what is called a bugcheck. A bugcheck is forcing the server to “blue screen” and therefore reboot. Bugchecks occur when earlier simple fixes do not work. For example if the service cannot be restarted then service is moved to another node in the DAG or the Exchange 2013 aware load-balancer takes the CAS server out of service. If Managed Availability still cannot fix the server it is bugchecked.
There is one or two obvious issues with this though – the first is when you are upgrading or patching the server and the second is in a lab environment. In both these scenarios you could have servers that are considered not responsive to Managed Availability when its only because a patch or Exchange cumulative update (CU, previously known as Rollup Updates), is being installed.
This blog will discuss how to tell Managed Availability not to cause things such as reboots to happen during updates or in low spec’ed lab environments.

Patching Exchange 2013 Servers

When the patch process starts on Windows or a Cumulative Update for Exchange is installed services are stopped and possibly disabled. Disk I/O might be higher and your underlying disk subsystem might not cope well (though this is more likely to be an issue in a lab environment). The last thing you want is services being restarted, services therefore failing, and therefore Managed Availability considering that the server is dead and needs a reboot – and so in the middle of an update it blue screens.
To place a server into Maintenance Mode before you upgrade it you need to run the following Exchange Management Shell cmdlets

Maintenance Mode on Mailbox or Multi-Role Servers

Set-ServerComponentState $env:COMPUTERNAME -Component HubTransport -State Draining -Requester Maintenance

Redirect-Message -Server $env:COMPUTERNAME -Target

Suspend-ClusterNode $env:COMPUTERNAME

Set-MailboxServer $env:COMPUTERNAME -DatabaseCopyActivationDisabledAndMoveNow $True

Set-MailboxServer $env:COMPUTERNAME -DatabaseCopyAutoActivationPolicy Blocked

Set-ServerComponentState $env:COMPUTERNAME -Component ServerWideOffline -State Inactive -Requester Maintenance

Get-ServerComponentState $env:COMPUTERNAME | Format-Table Component,State -Autosize

Get-MailboxServer $env:COMPUTERNAME | Format-Table DatabaseCopy* -Autosize

Get-ClusterNode $env:COMPUTERNAME | Format-List

Maintenance Mode on CAS Servers

Set-ServerComponentState $env:COMPUTERNAME -Component ServerWideOffline -State Inactive -Requester Maintenance

For mailbox or multi-role servers step 1 should be done independent of other steps. Step 1 places the transport queues into “draining” mode, which means the server processes existing queues but does not accept new connections. Once the queue has drained, which can be checked with Get-Queue, then do steps 3 to 9. (Added 5th Feb 2013**): To speed up draining of the queues it is possible in Exchange 2013 to move the messages to another server using Redirect-Message. The Target in RedirectMessage must be an FQDN and if the Server (i.e. where the queue is sourced) is missing then the local server is used. Only active queues are moved with this command, poison and shadow queues are not moved (End of Update**). Steps 3 to 6 place the DAG node offline and move mailbox databases onto other nodes in the DAG. Steps 7 to 9 confirm these changes with a report to the screen.

Note these cmdlets all use $env:COMPUTERNAME so they run on the local machine that you want to place into Maintenance Mode. You can replace $env:COMPUTERNAME with the actual server you want to effect if you want to run the cmdlets remotely.

CAS only servers only have one step, and that is the same as step 6 in the mailbox/multi-role server process.

Ending Maintenance Mode

On a CAS server, to return to functional mode, run the following:

Set-ServerComponentState $env:COMPUTERNAME -Component ServerWideOffline -State Active -Requester Maintenance

On a mailbox or multi-role server run the following:

Set-ServerComponentState $env:COMPUTERNAME -Component ServerWideOffline -State Active -Requester Maintenance

Resume-ClusterNode $env:COMPUTERNAME

Set-MailboxServer $env:COMPUTERNAME -DatabaseCopyActivationDisabledAndMoveNow $False

Set-MailboxServer $env:COMPUTERNAME -DatabaseCopyAutoActivationPolicy Unrestricted

Set-ServerComponentState $env:COMPUTERNAME -Component HubTransport -State Active -Requester Maintenance

Once mailbox or multi-role server steps are complete you need to move databases that you want back to this server, or start maintenance on another server (as that might move databases to this server for you).

Finally note that going into maintenance mode is not an immediate step. It takes somewhere between 5 and 10 minutes (in my tests) for the Health Service to pick up these changes and implement them. Also note that where you only have one server or one DAG node available, the Health Service will not action maintenance mode as it will reduce availability to a point where service fails – for example if you only have one CAS server then the above command will not stop connections to OWA of Frontend Transport through that one CAS server.

Building Exchange 2013 Lab Environments

All of the information for managing maintenance mode above is valid for lab environments, but its also worth considering the following cmdlet:

Set-ServerComponentState $env:COMPUTERNAME -Component RecoveryActionsEnabled -State Inactive -Requester Sidelined

The above will tell Managed Availability not to do any recovery actions in the event of an issue. Therefore if your lab is (for example) slow because you are overworking the disks, then your Exchange Servers don’t blue screen and add to the load on the disk.

If you see your lab environment is regularly reporting that the server recovered from an unexpected failure then see if the following bugcheck codes are in the Event Viewer. I’ve seen these as being caused due to attempts to force a bugcheck and reboot some of my lab machines whilst I was installing Exchange on other servers on the same disk.

  • 0x000000ef (i.e. CRITICAL_PROCESS_DIED)
  • 0x00000F4 (i.e. CRITICAL_OBJECT_TERMINATION)

by

Tags:

Comments

7 responses to “Placing Exchange 2013 Into Maintenance Mode”

  1. movi avatar
    movi

    Hey,
    good work but the commands are not full..kindly put the full commands as at the end of the 1st command you put DR at the end which does not make any Scence for new learner..
    kindly put the full commands so it help us.
    Reagrds

    1. Brian Reid avatar

      It says “ServerComponentState $env:COMPUTERNAME -Component HubTransport -State Draining -Requester Maintenance” in that line, not DR

  2. Shireesh avatar
    Shireesh

    The command text is truncating at the end and not visible. Please set it to wrap. Thanks

    1. Brian Reid avatar

      If you copy the code into Notepad you can see it. I do not have it set to wrap as that can cause other issues and if viewed on a mobile device then it wraps many times. To run the code you need to copy it to Notepad and save as a ps1 file anyway.

      1. Shireesh avatar
        Shireesh

        No Brian, somehow that does not work for me even with different browser. for example copying this to notepad just shows this. Please check.

        Set-ServerComponentState $env:COMPUTERNAME -Component ServerWideOffline -Sta

  3. John avatar
    John

    Just go to the html code and you will see the cmdlets.

  4. […] Placing Exchange 2013 Into Maintenance Mode […]

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.